Input Devices
The MPR121QR2 is a capacitive touch sensor controller that makes it very easy to integrate capacitive touch sensing into your project. It communicates via I2C, and works by measuring the capacitance of twelve electrode points. When an object comes close to the electrode connector, the measured capac..
₱180.00
-59%
Based on RF module RC522 Near Field Communication module, with operating frequency og 13.56mHz where you can read and write a tag. Compatible with all gizDuino / Arduino microcontroller boards. Specifications :
Power Input
3.3VDC
Data Interface
SPI Communication
Working current
13t..
₱75.00 ₱185.00
-41%
Pre-order
Brand: e-gizmo
Rotating controls are our most ergonomic way of adjusting something, and is the preferred method over push buttons, especially when it involves fast and repeated adjustments. (For example, a potentiometer for volume control.) But digital circuits are not exactly well suited for analog potentiometer ..
₱75.00 ₱127.00
Single Analog Thumb Joystick is the most suited for 2-axis control projects like remote control cars and many more. Specifications :
Power Input
5VDC
Output
Analog :
X-Axis : 0 - 1023
Y-Axis : 0 - 1023
Button : 1 || 0
Downloads :
Hardware Manual
Download
Sample Arduino/gizDuino Sketch
..
₱75.00
-200x200h.JPG "TFT LCD Shield 2.4\" with MicroSD Interface")
Ship in 1-3 days
TFT LCD Shield 2.4" with MicroSD InterfaceDownloads :
Manual
Download
Modified Library
Download
Sample Arduino/gizDuino Sketch
Download
Download All..
₱360.00
-45%
TinyRTC I2C Real Time Clock Powered by DS1307 and AT24C32 with 32kb EEPROM strorage. Specifications :
Power Input
5VDC
On-Board ICs
DS1307 & AT24C32
Battery
LIR2303 Rechargeable Lithium Battery
PCB Dimensions
25x28x8.4mm
Downloads :
Manual
Download
Lib..
₱48.00 ₱87.00
Brand: e-Gizmo
e-Gizmo RFID Card Reader 2 can be used as a stand-alone RFID Card Reader, or can be connected to a host controller (e.g. gizDuino/Arduino). It can store up to 100 RFID cards assigned with a unique 7-bit address each. A host controller can detect and read the card two ways: via its 7-bit addres..
₱690.00
Ship in 1-3 days
Brand: e-Gizmo
16 key keypad module configured in 4x4 array readily connects with any of eGizmo EZkonnek equipped microcontroller boards. Can be easily configured to connect with other controllers as well.Downloads :
Hardware Manual
Download
Sample Arduino / gizDuino Sketch
Download..
₱90.00
Ship in 1-3 days
Brand: e-Gizmo
Reliable fingerprint reader, complete with DSP controller for easy integration with microcontroller circuits, PCs, or industrial controllers.Specifications :Power Input3.3VDCDSP ( Digital Signal Processing )TI TMS320VC5416 Serial CommunicationUARTDefault Baud Rate19200 bpsDownloads :ManualDownl..
₱2,550.00
Showing 1 to 10 of 10 (1 Pages)