All Products
Pre-order
Pan-Tilt Servo Kit (SOON)NOTE: CELLPHONE and MICROCONTROLLER with BT SHIELD are not included.
Videos :..
₱2,495.00
A low-cost pulse generator module based on a 555 timer chip. It has a jumper selectable frequency band setting spanning 1Hz-200KHz in 4 ranges, a frequency and duty cycle trimmer resistor adjustment.
Specifications :
Power Input
5-15VDC
Current Output
15mA to 35mA
Input current
..
₱49.00
-32%
Need 5V or 3.3V for your sensor or modules and your power supply is 12V? Worry no more! this module gives you multi 3.3V and 5V DC output from a single 12V input...
₱36.00 ₱53.00
The MPR121QR2 is a capacitive touch sensor controller that makes it very easy to integrate capacitive touch sensing into your project. It communicates via I2C, and works by measuring the capacitance of twelve electrode points. When an object comes close to the electrode connector, the measured capac..
₱180.00
-44%
Mini
NodeMCU 4M bytes Wifi Internet of
THINGS devboard based ESP8266
Features :
11 digit i/o pins, all pins have interrupt/pwm/I2C/onece-wire supported (except D0).
1 Analog input (3.2V Max input)
Micro USB Programming Port
Compatible with gizDuino, Arduino and N..
₱159.00 ₱286.00
FREE 8GB Micro SD card!!Lightweight Mini DVR Camera with card reader, accessories, and FREE 8GB uSD Flash.-720p/1080p FULL HD recordings- Built-in LiPo battery can record up to 60-minutes of video with one full charge.- USB 2.0 & Video Out Port- Camera weigh just 11 grams.Secondary Drone Camera,..
₱1,700.00
Pre-order
Mini Bot Chassis Disassembled
Specifications :
Power Input (Motor)
6VDC
Weight:
0.5KG
Dimensions:
Length:
115 mm
Width:
132 mm
Height:
97 mm with Spoiler,w/o 60 mm
Downloads :
Assembly Manual
Download..
₱799.00
Applicable to any water measuring projects such as water tank monitoring, aquarium level, or even refilling containers that needs measurement.Specifications :
Wire Length
395mm
Max Switching Current
0.5A
Width x Length
24x66mm
Maximum Load
50W
Maximum Load Current
1A
..
₱95.00
A light sensor with easy to use digital and adjustable sense of the light intensity hitting the sensor. The digital output is a 1 bit digital output that switches state when the light intensity reaches a certain threshold. This threshold is a user presettable through the use of a trimmer resistor. S..
₱29.00
-33%
L298N IC as the main driver chip with a strong driving capability, lowheat, anti-interference ability.Specifications :
Power Input
12VDC
Logic Voltage
5V,0A-0.36A
Master Chip
L298N
Operating Mode
H-Bridge Drive (Dual)
Drive Current
2A (Max) Single Bridge
Maximum Po..
₱98.00 ₱146.00
This passive buzzer module has a built-in driver, hence you can connect its input directly to a has controller. Note that this is not a stand alone buzzer, it requires a driving signal form a host controller. This buzzer is at its loudest when driven with a 2Khz-5KHz square wave. Compatible with all..
₱27.00
Pre-order
Note: This product may no longer be available. Click here for the suggested replacement.The Hall Magnetic Sensor has a single signal output pin. It can be used for motor speed and position detection.Specifications :
Power Input
5VDC
Sensor
3114 Hall Effect Sensor
On-Board IC
LM39..
₱53.00