All Products
Brand: e-Gizmo
This product is a fixed output dc/dc converter designed as a drop-in replacement for popular 3-terminal positive voltage regulator. It has the same pin arrangement as with the 78XX series, with an extra enable pin to allow your circuit to shut down the regulator to further lower the power consumptio..
₱49.00
NC3 3-way Screw Terminal2.5mm^2 Screw Terminal on one end, 2x1.5mm^2 push-through on the other end.Voltage: 380VAC maxCurrent: 20AWire Size: Up to 2.5mm^2 on one end, up to 2x 1.5mm^2 on the other endScrew Type: Flathead..
₱12.00
NC3 3 way Screw TerminalVoltage: 380VAC maxCurrent: 20AWire Size: Up to 2.5mm^2 on each sideScrew Type: Flathead..
₱10.00
Pre-order
Cable GlandSize: PG9Color: GrayCable Range: 4-8mmRetaining Nut size: 22Note: PG9 Inside Diameter= 11mm, Outside Mounting Diameter = 16mm..
₱9.00
5-pole wafer wire connector L= 70mm, wafer termination on one end only.Pitch= 2.0mmWire Length= 70mmWafer Color = WhiteWire Colors: Orange,Red,Pink,Yellow,Black..
₱8.00
3-pole wafer wire connector L= 55mm, wafer termination on one end only.Pitch= 1.5mmWire Length= 55mmWafer Color = BlackWire Colors: Red, Yellow, Green..
₱6.00
2x7 cable with female to female wafer termination at both ends.Pitch= 2.0mmWire Length= 100mmWire Size: AWG24Wafer Color = White..
₱22.00
2x8 cable with female to female wafer termination at both ends.Pitch= 2.0mmWire Length= 100mmWire Size: AWG24Wafer Color = White..
₱16.00
![CPU Heatsink Cooler with Built-in Copper Thermal Pad [USED]](https://gizduino.com/gizmoshop/image/cache/package/HEATSINK/130400017-200x200.jpg "CPU Heatsink Cooler with Built-in Copper Thermal Pad [USED]")
![CPU Heatsink Cooler with Built-in Copper Thermal Pad [USED]](https://gizduino.com/gizmoshop/image/cache/package/HEATSINK/130400017/130400017-1-200x200.jpg "CPU Heatsink Cooler with Built-in Copper Thermal Pad [USED]")
Pre-order
This product is an Aluminum Heatsink used as CPU heatsink/cooler. It has a integrated copper heat transfer pad for a more efficient cooling.Aluminum Heatsink Dimensions: 85 x 85 x 25mmTotal Weight:140gNote: This is a used product. Expect some minor dents and scratches.Dimensions and weight are all a..
₱55.00
This product is a Digital Delay Reverberation Effects Processor board based on PT2399 Echo IC.This module has no built-in microphone preamplifier, and is an intended addition to existing circuits.Operating Voltage: 6-15V DCDelay time: 31-342ms AdjustableTHD: 0.13% typ at 31ms delay, 1.0% Typ at 342m..
₱155.00
-78%
Pre-order
Ceramic Cartridge Heater, stainless body.Rated Voltage: 220VRated Power: 150WHeater Dimensions: d10 x 135mm approxWire Length: 350mm Approx..
₱199.00 ₱900.00
![LEM LF205-S 200A AC/DC Current Sensor Transducer [USED]](https://gizduino.com/gizmoshop/image/cache/package/SENSOR/122300016-200x200.jpg "LEM LF205-S 200A AC/DC Current Sensor Transducer [USED]")
![LEM LF205-S 200A AC/DC Current Sensor Transducer [USED]](https://gizduino.com/gizmoshop/image/cache/package/SENSOR/122300016/122300016-1-200x200.jpg "LEM LF205-S 200A AC/DC Current Sensor Transducer [USED]")
Brand: LEM
AC/DC Non Invasive Hall Effect Closed Loop Current SensorHigh Accuracy, low temperature driftPower Supply: +/- 12V to +/- 15VDCNominal Current: 200ArmsMeasuring Range: 0-+/-420ASecondary Nominal Current: 100mATurns Ratio: 1:2000Accuracy: +/- 0.5%Linearity:..
₱1,480.00